A Review Report of Natural Fiber Reinforcement-Based Composites and their Advantages over Traditional Composites
Abstract
Keywords
Full Text:
PDFReferences
Kestur G. Satyanarayana*, Gregorio G.C. Arizaga, Fernando Wypych. Biodegradable composites based on lignocellulosic fibers—An overview. Department of Chemistry, Federal University of Paraná, P.O. Box 19081, Jardim das Américas, 81531-980 Curitiba, PR, Brazil.
James Sternberga, b, Olivia Sequertha, b, c, *Srikanth Pillaa, b, c, d. Green Chemistry Design in Polymers Derived from Lignin: Review and Perspective. Department of Automotive Engineering, Clemson University, Greenville, SC 29607, United Statesb Clemson Composites Center, Clemson University, Greenville, SC 29607, United Statesc Department of Material Science and Engineering, Clemson University, Clemson, SC 29634, United Statesd Department of Mechanical Engineering, Clemson University, Clemson, SC 29634, United States.
Assia Chichane, Radouane Boujmal and Abdellah El Barkany. Towards a green & ecological revolution: Review of natural reinforcing bio-composites and bio-hybrid composites.
V. Mazzantia, R. Parianteb, A. Bonannoc, O. Ruiz de Ballesterosd, F. Mullicaa, *, G. Filip poneb. Reinforcing mechanisms of natural fibers in green composites: Role of fibers morphology in a PLA/hemp model system. a Department of Engineering, Università degli Studi di Ferrara, via Saragat 1, Ferrara, Italy b DICMaPI, Università di Napoli Federico II, P. le Tecchio 80, Napoli, Italy c CNR-IMAMOTER Ferrara, Via Canal Bianco 28, Ferrara, Ital d Dipartimento di Scienze Chimiche, Università di Napoli Federico II, Via Cinthia, Napoli, Italy.
Samia Adil, Bijender Kumar, Pooja S. Panicker, Duc Hoa Pham, Jaehwan Kim *. High-performance green composites made by cellulose long filament-reinforced vanillin epoxy resin. Creative Research Center for Nanocellulose Future Composites, Department of Mechanical Engineering, Inha University, 100, Inha-ro, Michuhol-gu, Incheon, 22212, South Korea.
Rohan M. Bajracharyaa, Dilpreet S. Bajwaa*, Sreekala G. Bajab. Mechanical properties of polylactic acid composites reinforced with cotton gin waste and flax fibers. Department of Mechanical Engineering, North Dakota State University, Fargo ND 58105, USA b Department of Agricultural and Biosystems Engineering, North Dakota StateUniversity, Fargo ND 58105, USA.
Feng Wua, 1, Manjusri Misraa, b, *, Amar K. Mohantya, b, *. Challenges and new opportunities on barrier performance of biodegradable polymers for sustainable packaging. a Bioproducts Discovery & Development Centre, Department of plant agriculture, Crop science building, University of Guelph, Guelph, Ontario (ON), N1G, 2W1, Canadab School of Engineering, Thornbrough building, University of Guelph, Guelph, Ontario (ON), N1G, 2W1, Canada.
Rachid Hsissou a, 1,Rajaa Seghiri a, Zakaria Benzekri a, Miloudi Hilali b, Mohamed Rafik a, Ahmed Elharfi a. Polymer composite materials: A comprehensive review. a Laboratory of Organic and Inorganic Chemistry, Electrochemistry and Environment, Department of Chemistry, Faculty of Sciences, Ibn Tofaïl University, B.P. 242, 14000 Kenitra, Morocco b Laboratory of Plant Chemistry Organic and Bioorganic Synthesis, Faculty of Sciences, University Mohamed V, BP 1014 Rabat, Morocco.
Anja Hagenaua, 1, Michael H. Suhrea, 2, Thomas R. Scheibela, b, c, d, e, *. Nature as a blueprint for polymer material concepts Protein fiberreinforced composites as holdfasts of mussels.
A.K. Bledzki, J. Gassan*. Composites reinforced with cellulose based fibres. Universita ̈t (Gh) Kassel, Institut fu ̈rWerkstofftechnik, Kunststoff- und Recyclingtechnik, Mo ̈nchebergstraße 3, 34109 Kassel, Germany.
Nik Zainuddin NAM, Abd Razak NA, Ab Karim MS. Surface profile of laminated transfemoral socket fabricated with different types of reinforcement materials. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 2023;237(6):741-748. doi:10.1177/09544119231171787.
Juan Cheng a, *, Rui Gao b, Yong Zhu a, Qinbao Lin a. Applications of biodegradable materials in food packaging: A review. a Key Laboratory of Product Packaging and Logistics, College of Packaging Engineering, Jinan University, Zhuhai 519070, China b Zhuhai RuiTe Photoelectric technology CO., LTD. Zhuhai 519075, China.
M Abdur Rahman1. Serajul Haque1. Muthu Manokar Athikesavan1. Mohamed Bak Kamaludeen1. A review of environmentally friendly green composites: production methods, current progresses, and challenges. Received: 25 December 2021 / Accepted: 16 December 2022 © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2023.
Kadhim, Ameer A. et al. “Improvement Fatigue Life and Strength of Isotropic Hyper Composite Materials by Reinforcement with Different Powder Materials.” (2018).
Gómez-Suarez, Sergio Andrés and Edwin Córdoba-Tuta. “Composite materials reinforced with fique fibers – a review.” Revista UIS Ingenierías (2022): n. pag.
Mutu, Halil Burak and Züleyha Aslan. “Experimental investigation of buckling behavior of E-glass/epoxy laminated composite materials with multi-walled carbon nanotube under uniaxial compression load.” Journal of Composite Materials 56 (2022): 2573 - 2584.
Ali Kandemir *, Thomas R. Pozegic, Ian Hamerton, Stephen J. Eichhorn and Marco L. Longana. Characterisation of Natural Fibres for Sustainable Discontinuous Fibre Composite Materials. Bristol Composites Institute (ACCIS), Department of Aerospace Engineering, School of Civil, Aerospace, and Mechanical Engineering, Queen’s Building, University of Bristol, University Walk, Bristol BS8 1TR, UK; tpozegic@yahoo.co.uk (T.R.P.).
Dumitru Bolcu † and Marius Marinel Sta ̆nescu *, †. A Study of the Mechanical Properties of Composite Materials with a Dammar-Based Hybrid Matrix and Two Types of Flax Fabric Reinforcement. Department of Mechanics, University of Craiova, 165 Calea Bucures ̧ti, 200620 Craiova, Romania.
Raghav, Gurumoorthy R. et al. “EFFECT OF CELLULOSE NANOFIBERS FROM RED COCONUT PEDUNCLE WASTE AS REINFORCEMENT IN EPOXY COMPOSITE SHEETS.” Cellulose Chemistry and Technology (2023): n. pag.
Todor, Mihai et al. “Researches on the development of new composite materials complete / partially biodegradable using natural textile fibers of new vegetable origin and those recovered from textile waste.” IOP Conference Series: Materials Science and Engineering 294 (2018): n. pag.
Saha, Debarghya and Bhabani K. Satapathy. “Performance sensitivity analysis of natural mineral silicates filled friction composites using GD – ANN approach.” Journal of Tribology (2022): n. pag.
Ahmad Fauzi, Asfa Amalia et al. “On the Use of Dolomite as a Mineral Filler and Co-Filler in the Field of Polymer Composites: A Review.” Polymers vol. 14, 14 2843. 13 Jul. 2022, doi:10.3390/polym14142843
Singh, Shubham Kumar et al. “Rice Straw Based Natural Fiber Reinforced Polymer for Sustainable Bio- Composites: A Systematic Review.” Evergreen (2023): n. pag.
Patra, Subhashree et al. “Mechanical properties of bio-fiber composites reinforced with luffa cylindrica irradiated by electron beam.” International Journal of Modern Physics B (2019): n. pag.
H, Mohit et al. “Effect of bio-fibers and inorganic fillers reinforcement on mechanical and thermal characteristics on Carbon-KevlarBasalt-Innegra fiber bio/ synthetic epoxy hybrid composites.” Journal of Materials Research and Technology (2023): n. pag.
Saha, Anindita et al. “Physio-mechanical properties and applications of natural fiber reinforced bio-composites.” GSC Advanced Engineering and Technology (2022): n. pag.
Manickaraj, Kavin et al. “A comparative study on the mechanical properties of African teff and snake grass fiber-reinforced hybrid composites: effect of bio castor seed shell/glass/SiC fillers.” International Polymer Processing 38 (2023): 551 - 563.
Dahal, Raj Kumar et al. “The Interaction Effect of the Design Parameters on the Water Absorption of the Hemp-Reinforced BiocarbonFilled Bio-Epoxy Composites.” International journal of molecular sciences vol. 24, 7 6093. 23 Mar. 2023, doi:10.3390/ijms24076093.
Balasubramanian, Maridass et al. “An overview: characterization of natural fiber reinforced hybrid composites.” World Journal of Engineering (2021): n. pag.
Balasubramanian, Maridass et al. “An overview: characterization of natural fiber reinforced hybrid composites.” World Journal of Engineering (2021): n. pag.
Camano, Sabela et al. “Comparison of Bio and Eco-technologies with Chemical Methods for Pre-treatment of Flax Fibers: Impact on Fiber Properties.” Journal of Engineered Fibers and Fabrics 9 (2014): n. pag.
Benaniba, Samir et al. “Thermo-mechanical characterization of a bio-composite mortar reinforced with date palm fiber.” Journal of Engineered Fibers and Fabrics 15 (2020): n. pag.
Boubaaya, Rabah et al. “Impact of the loading of date palm fibers on the performances of mortars.” REM - International Engineering Journal (2023): n. pag.
Gül, Çiğdem and Emine Dilara Koçak. “Composite Material Design for Aircrafts from Sustainable Lignocellulosic Fibers—A Review.” Sustainable Design in Textiles and Fashion (2021): n. pag.
Nascimento, Lucio Fabio Cassiano et al. “Ballistic Performance in Multilayer Armor with Epoxy Composite Reinforced with Malva Fibers.” (2017).
Helaili, Sofiene et al. “Valorization of the use of natural Alfa (Stipa tenacissima L.) fiber in composite reinforcing plates based on natural fibers and metal fabric.” Innovative Infrastructure Solutions 8 (2023): n. pag.
Rippa, Massimo et al. “Infrared Imaging Analysis of Green Composite Materials during Inline Quasi-Static Flexural Test: Monitoring by Passive and Active Approaches.” Materials (Basel, Switzerland) vol. 16, 8 3081. 13 Apr. 2023, doi:10.3390/ma16083081.
Shiferaw, Melese et al. “Roles of Composite Materials for the Application of Lightweight Automotive Body Parts and their Environmental Effect: Review.” International Journal of Scientific Research in Science and Technology (2023)
DOI: http://dx.doi.org/10.70711/frim.v2i11.5551
Refbacks
- There are currently no refbacks.
