Fault Diagnosis Method of Rail Transit Signal and Control System
Abstract
With the rapid development of rail transit industry, the failure of signal and control system has attracted increasing attention. Based
on the actual operation and maintenance of rail transit signal and control system, this paper summarizes and analyzes the common fault types,
and puts forward the targeted fault diagnosis method from the system level. It is hoped that the research results of this paper are of great significance to improve the safety and reliability of the rail transit system, and provide useful reference for the operation and maintenance management of the industry.
on the actual operation and maintenance of rail transit signal and control system, this paper summarizes and analyzes the common fault types,
and puts forward the targeted fault diagnosis method from the system level. It is hoped that the research results of this paper are of great significance to improve the safety and reliability of the rail transit system, and provide useful reference for the operation and maintenance management of the industry.
Keywords
Rail transit; Signal and control; Fault diagnosis; On-line monitoring and expert system
Full Text:
PDFReferences
[1] Wang Junzhe, Zhu Lin, Liu Zhigang, et al. Lifecycle risk assessment of urban rail transit equipment based on reliability analysis [J /
OL]. Research on Urban Rail Transit, 1-9 [2025-02-25].
[2] Yuan Yan. Design of intelligent detection system for vibration failure of urban rail transit vehicles [J / OL]. Computer measurement and
control, 1-8 [2025-02-25].
[3] Zhu Zhiping. Fault analysis and processing of the video monitoring system of urban rail transit [J]. Modern Information Technology,
2025, 9 (02): 154-158.
DOI: http://dx.doi.org/10.70711/frim.v3i10.7529
Refbacks
- There are currently no refbacks.
